Nas Navigator2 For Mac Os - Buffalo LS410D User Manual

any other hard drive.

NAS Navigator2 for Mac OS

NAS Navigator2 is a utility program that makes it easy to display Settings, change the LinkStation's IP address, or check
its hard drive. If you installed the LinkStation with the LinkNavigator CD, NAS Navigator2 was installed automatically.
To launch it, click the
Click your LinkStation's icon to open a share on the LinkStation and display:
• Total capacity
• Capacity in use
• IP address
• Workgroup
• Subnet mask
• Default gateway
• MAC address
• Firmware version
Name
Open
Refresh
Settings
Configure
Label Color
View Options
Auto Power Mode
icon in the Dock.
Description
Opens the default shared folder for a selected LinkStation.
Searches for NAS devices on the network again.
Opens Settings for the selected LinkStation.
Opens a window that lets you configure the NAS's IP
address or open Settings.
Selects the color of the name displayed below the icon.
Lets you choose icon size, position, and view mode.
Auto power mode can turn supported TeraStations and
LinkStations on the network on and off automatically.
81