Amber; Default Settings; Specifications - Buffalo LinkStation 500 User Manual

Amber

If there is a status message, the power LED will blink amber. You can also see any status messages in NAS Navigator2.
Information Code
I12
I13
I16
I18
I19
I20
I21
I22
I23
I25
I28
I52

Default Settings

Administrator's Name
Password
Shared Folders
DHCP Client
Microsoft Network Group Setting
SMB
AFP
FTP
NTP
DLNA
iTunes Server
BitTorrent
Wake-on-LAN
RAID Mode

Specifications

Check the Buffalo website for the latest product information and specifications.
Description
Operating in degraded mode.
Formatting RAID array X.
Creating RAID array X.
Rebuilding RAID array X.
Note: Transfer speeds are slower during
the rebuilding process.
Writing 0s to RAID array X, erasing all
data.
Formatting hard drive X.
Checking hard drive X.
Erasing the data for hard drive X.
System is being initialized.
Updating the LinkStation firmware.
Formatting USB hard drive.
A new firmware version has been
released.
admin
password
"Public" and "admin" (for both Windows and Mac computers).
Normally, the LinkStation will get its IP address automatically from a DHCP
server on the network. If no DHCP server is available, then an IP address will
be assigned as follows:
IP address: 192.168.0.9
Subnet mask: 255.255.255.0
WORKGROUP
Enabled
Disabled
Disabled
Enabled
Enabled
Disabled
Disabled
Enabled
RAID 1
Corrective Action
-
-
-
-
-
Don't turn off the LinkStation.
Don't turn off the LinkStation.
-
-
-
Don't turn off the LinkStation.
Update the firmware.
73