Buffalo LS410D User Manual page 75

5
Click the Time tab. Enable NTP server and check "Use Local Date/Time" to use your computer's time settings for the
LinkStation.
By default, the LinkStation adjusts its clock automatically by using a default NTP server. This NTP server belongs to
Internet Multi Feed Inc. For more information, visit http://www.jst.mfeed.ad.jp.
To use a different NTP server, Name/Time/Language from "Management" screen. Click Time, then Edit. Uncheck "Use
Default NTP Server" and enter a new NTP IP address. Click OK.
If NTP is not used, enter the time and date manually. Click Use Local Date/Time to import the time and date from
your computer.
If an NTP server is specified by name instead of IP address, make sure that a DNS server is configured for the
LinkStation.
Note: The internal clocks of the LinkStation and other devices on your network may run at slightly different speeds.
Over a long period of time your network devices may show somewhat different times, which can cause network
problems. If clocks on your network vary by more than 5 minutes it may cause unexpected behavior. For best
results, keep all clocks on the network set to the same time by adjusting them regularly, or use an NTP server to
correct them all automatically.
6
Click the Language tab. Select the language to be used in the Windows client, then click OK.
75