Default Settings - Buffalo LinkStation User Manual

Appendix

Default Settings

The following settings are factory defaults for the LinkStation.
Administrator's Name
Password
Shared folders
DHCP Client
Registered Group
Microsoft Network
Group Setting
Ethernet
Frame Size
AFP
FTP
NTP
PrintServer
WebAccess
Media Server
(DLNA/iTunes)
BitTorrent
Note: The installation program on the LinkNavigator CD can only configure a LinkStation once.
To automatically install a LinkStation a second time, use the Init button to initialize the
LinkStation's configuration first.
LinkStation User Manual
admin
password
By default, the folder "share" may be accessed from both Windows and
Macintosh computers. The recycle bin is [Enabled] on 'share' by default.
Normally, the LinkStation will get its IP address automatically from a
DHCP server on the network. If no DHCP server is available, then an IP
address will be assigned as follows:
IP Address: 169.254.xxx.xxx where xxx are random numbers between 1
and 254.
Subnet Mask: 255.255.0.0
The LinkStation has 3 default groups: hdusers, admin and guest. You
cannot edit or delete these groups.
WORKGROUP
Note: If you installed the LinkStation from the LinkNavigator installation
CD, then the LinkStation's workgroup is set to the same workgroup as the
computer you used for setup.
1518 bytes
Disabled
Disabled
Automatic
Enabled
Disabled
Enabled
Disabled
152