2
Select RAID.
3
Select the array to delete.
4
Click Delete RAID Array.
5
Step through the wizard to delete the array.
Once JBOD is configured, create shared folders on each drive to use them.
Changing RAID Mode
To change the RAID mode, first put the drives in JBOD mode.
1
In Advanced Settings, click Drives.
2
Select RAID.
3
Click the array to delete.
Note: If the "RAID Mode" is blank, the array is already in JBOD mode. Proceed to step 7.
4
Click Delete RAID Array.
5
The "Confirm Operation" screen will open. Enter the displayed number, then click OK.
37