Installation - Buffalo LS410D User Manual

5
Power Switch
Move the switch up and down to power on and off.
6
USB 2.0 Port
Compatible Buffalo USB hard drives, USB flash drives, digital cameras, USB UPS connection, and USB printers can
be connected. USB hubs are not supported.
7
Power Connector
Use the included power cable to connect to a surge protector or outlet.
8
Anti-Theft Security Slot
Use this slot to secure your LinkStation with a cable lock (not included).
9
LAN Port
Connect to a router, hub, or switch on your Ethernet network with the included Ethernet cable.
10
Hook
To secure the power cable, insert it in the slot as shown.
11
Disk 1 Error LED (LS420D/LS421DE only)
If there is a hard drive error on drive 1, this LED will light.
12
Disk 2 Error LED (LS420D/LS421DE only)
If there is a hard drive error on drive 2, this LED will light.
13
USB 3.0 Port (LS421DE only)
Compatible Buffalo USB 3.0 hard drives can be connected. USB hubs are not supported.
Notes:
• The USB 3.0 port doesn't support isochronous transfers when the USB device server is enabled.
• With Mac OS, only the USB 2.0 ports work with the USB device server.

Installation

1
Connect the LinkStation's Ethernet and power cables. If it's an LS421DE, install the hard drive. Turn the LinkStation
on.
2
Insert the LinkNavigator CD into your computer. LinkNavigator will launch.
Notes:
• If the CD doesn't launch automatically, double-click the (LSNavi.exe) icon.
8