Print Mode - Xerox DocuPrint 240A User Manual

2 Sided
Makes settings for 2 sided printing.
Note
• You can set this item only when the duplex unit (optional) is installed.
[Off] (default)
Select this when you do not want to perform 2 sided printing.
[Long Edge Flip]
Select this to print a document so that the printed characters face toward you when paper
is flipped along the long edge.
[Short Edge Flip]
Select this to print a document so that the printed characters face toward you when paper
is flipped along the short edge.

Print Mode

Sets whether to have high quality or high speed.
[Normal] (default)
Select this to print documents at normal speed and normal quality.
[High Quality]
Selecting this decreases printing speed but prints images at high quality.
[High Speed]
Select this to print documents at high speed.
* No. 1, 2, 3, and 4 of 4 are available (refer to P. 94).
Password
If a password has been set for a PDF file, specify the password here in advance. Printing
will be performed only when the password set in the PDF file to be printed matches the
password specified here.
You can specify up to 32 alphanumeric characters.
Collated
Select this to set whether to collate multiple copies of the printout by sets (sorted in the order
of page 1, 2, 3,...1, 2, 3...).
The default is [Off].
Output Size
Specifies the paper size to be output.
[A4] (default)
Select this to print on A4-size paper.
[Auto]
Select this to print on a paper size that is automatically determined according to the size
and settings of the PDF file to be printed.
70
4 Settings on the Control Panel