Adjusting The Tone (Tone) - Denon AVR-S920W Owner's Manual

Contents Connections

Adjusting the tone (Tone)

Adjusts the tonal quality of the sound.
1
Press OPTION.
The option menu screen is displayed.
2
Use ui to select "Tone", then press ENTER.
The "Tone" screen is displayed.
3
Use o p to set the tone control function to on/off.
On:
Off
(Default):
Front panel Display
Playback
Allow tone adjustment (bass, treble).
Playback without tone adjustment.
Rear panel
Settings
4
Select "On" in step 3 and press i to select the sound
range to be adjusted.
Bass:
Treble:
5
Use o p to adjust the tone, then press ENTER.
-6 dB – +6 dB (Default : 0 dB)
0 "Tone" settings are stored for each input source.
0 This cannot be set when the sound mode is set to "Direct" or "Pure Direct".
0 This item cannot be set when "Dynamic EQ" is set to "On". (v p. 158)
0 You cannot set this when no audio signal is input or in the menu "HDMI Audio Out"
is set to "TV". (v p. 164)
115
Remote
Tips Appendix
Adjust bass.
Adjust treble.
Index