FinePix A201 (U/E/EG) SERVICE GUIDE
3-3-6.Customizing of Adjustment Software
Customizing for the adjustment software is
explained below.
1.Compiles
Procedure <Fig.3-12>
1) Click on Mode Setting from the basic software
program's menu bar. The "Customize" dialog box
will be displayed.
2) From the "Customize" dialog box, select "Compile."
3) Click the Select User Program button, then select
the file 'Fx_A101.ff'.
4) Click the Select Editor button, then select
'Write.exe.'
2.EVR
Procedure <Fig.3-13>
1) Select "EVR" from the "Customize" dialog box.
2) Conditions
etc(-V2)
LANC page check
3.Hardware
Procedure <Fig.3-14>
1) Select "Hardware" from the "Customize" dialog
box.
2) Conditions
Etc
Debug Mode
Check
Check
7 Segment (-7)
Ignore Focus I/O
3. Adjustment
<Fig.3-12> Compile
2)
<Fig.3-13> EVR
2)
<Fig.3-14> Hardware
3)
4)
21