Table of Contents
Advertisement
3. Adjustment
3.Adjustment
3-1.Important Point of Adjustments when Replacing Major Parts
After the replacement of the LENS CONST, MAIN PWB ASSY and LCD make adjustments
that are marked 'O' in Table 1.
LENS CONST
MAIN PWB ASSY
LCD
*1:Please do the Flash adjustment after completing the CAM adjustment.
*2:When MAIN PWB ASSY is exchanged, the CCD's defective data will be lost. Therefore, you have to
remove Flash_ROM IC(IC212) from defective MAIN PWB ASSY. And then, you have to exchange
Flash_ROM IC(IC212) of new MAIN PWB ASSY to a Flash_ROM IC you removed before you replace
MAIN PWB ASSY.
3-2.Preparation for Adjustments
3-2-1.Measuring Equipments
Names
Stabilized Power Supply
Pattern Box
Waveform Monitor
Digital Voltmeter
Personal Computer
Brightness meter
Color meter
14
Battery Adj.
LCD Adj.
O
O
O
Remarks
Comparable to the PTB450 or equivalent
For inspecions
DOS-V (PC-AT) / OS:Windows98
LS-110 (Made by Minolta) or equivalent
COLOR METER 3F (Made by Minolta) or equivalent
FinePix A201 (U/E/EG) SERVICE GUIDE
CCD data input
Cam Adj.
O
O
O*2
O
Table 1
Flash Adj.
End setting
O*1
O
O*1
O
O
Advertisement
Table of Contents
