Calibration Method Of Pattern Box; Adjustment Software Installation; Various Downloading Software Decompressions, Preservation Methods, And Notes - FujiFilm FinePix S5200 Series Service Manual

4. Adjustments
4-4.

Calibration method of pattern box

< Use the pattern box for CAMERA adjustment >
Turn on the power supply in the pattern box.
Afterwards, wait for about ten minutes so that the source of
light may stabilize.
(1) Brightness:
160±5cd/m (with LB140 filter)
2
No chart, center of pattern box
Minolta brightness meter LS-110 or equivalent
* Calibration method
Place the filter (LB140) against the pattern box. With the
filter (LB140) in contact with the brightness meter, adjust
the pattern box brightness to 160±5cd/m
(2) Color temperature:aa
6100±50 K (with LB140 filter)
No chart, center of pattern box
Minolta color meter IIIF or equivalent
* Calibration method
Place the filter (LB140) against the pattern box. With the
filter (LB140) in contact with the color temperature meter,
adjust the pattern box color temperature to 6100 ± 50 K.
4-5.

Adjustment software installation

4-5-1. Various downloading software decompressions, preservation methods, and notes

The PC adjustment softwares are in a specified Web server,
and both of these are the compression of ZIP form files.
Therefore, after downloading these compression files from
the Web server, the decompression of the file is necessary.
In the decompression software, if the decompression of the
ZIP form can be done, any software is OK.
(Please prepare each one for the decompression software.)
The decompression and the preservation method of the PC
adjustment software and the firmware are described
to the following.
* The PC adjustment software decompression and
preservation method
<Step1>
The adjustment software is downloaded from WEB, and
software is installed in the PC.
We have uploaded the "PC Adjustment Software
(ZJ00927-100.zip) for "FinePixS5200_5600_W" on our
website: (http://fujifilm-di.intranets.com/).
<Step2>
"ZJ00927-100" is a compression of "ZIP type" file.
The "FinePixS5200_5600_W" and "SU1760" folder can be
done by extracting it by "Compression software".
Copy the "FinePixS5200_5600_W" and "SU1760" folder to
the "C" drive on the Adjustment PC.
62
2 .
FinePix S5200/S5600 Service Manual
<Fig. 4-4-1> Calibration method of pattern box
FxS5200_5600 W PC Soft Ver.1.00 ZJ00927-100.zip
<Fig. 4-5-1> Fujifilm-di.intranets Screen
My Computer
3.5inch FD(A:)
(C:)
ZJ00927-100
FinePixS5200_5600_W
SU1760
<Fig. 4-5-2>
Pattern BOX
(All white)
LB140