Specifying A Recipient; To Use A Program - Oce cm3521 User Manual

Using fax functions
4.2

Specifying a recipient

!
Detail
Destinations can easily be specified if they have been
registered in Utility mode. For details on registering
destinations, refer to the User's Guide [Facsimile
Operations] and the User's Guide [Network Facsimile
Operations].
To send or receive faxes manually, touch [Off-Hook].
When this button is touched, the dial tone can be heard
from the speaker. For details, refer to the User's Guide
[Facsimile Operations] and the User's Guide [Network
Facsimile Operations].
The following procedure describes how to specify the
recipient where the fax is to be sent.

To use a program

If a destination has been registered with a program, the
fax number can be dialed simply by pressing the
program button.
If a destination has not been registered with a program,
the destination cannot be specified.
If transmission settings have been registered with the
program, the functions are automatically set.
Only one program can be selected.
cm3521
4
4-5