To Select Finishing Settings - Oce cm3521 User Manual

Using copy functions

To select Finishing settings

1
In the Basic screen, touch [Finishing].
The Finishing screen appears.
2
Select the desired settings.
– To cancel changes to the settings, touch
[Cancel].
– To cancel a setting, touch the button again to
deselect it.
– If the "Corner Staple", "2 Staple", "2-hole Punch"
or "3-hole Punch" setting was selected, touch
[Position Setting], and then touch the button for
the desired position.
cm3521
2
2-29