2.10 Selecting Fold & Staple Settings; To Bind Paper At The Center (Fold & Staple Settings) - Oce cm3521 User Manual

Using copy functions
2.10 Selecting Fold & Staple settings
The paper that is fed out can be folded in half and
stapled at two places along the center.
The Fold & Staple settings are available only if the
saddle stitcher is installed on the finisher.
The following procedure describes how to specify Fold
& Staple settings.
To bind paper at the center (Fold & Staple settings)
1
In the Basic screen, touch [Fold & Staple].
The Fold & Staple screen appears.
cm3521
2
2-31