Set Up A Repeater - NETGEAR JR6150 User Manual

The wireless MAC address of the router displays onscreen. The 2.4 GHz and 5 GHz WiFi
bands are configured separately.
3. Select the Enable Wireless Repeating Function check box.
4. Select the Wireless Base Station radio button.
5. To prevent wireless clients from associating with the base station and allow LAN client
associations only, select the Disable Wireless Client Association check box.
You can leave the check box cleared if you prefer wireless clients to be able to associate
with the base stations.
6. In the Repeater MAC Address 1 through 4 fields, enter the MAC addresses for the access
points that will function as repeaters.
If your router is the base station, it can function as the "parent" for up to four other access
points.
7. Click the Apply button.

Set Up a Repeater

To set up the repeater to avoid conflicts with the wireless connection to the base station, use
a wired Ethernet connection.
Note: If you set up your router as a base station with a non-NETGEAR
access point as the repeater, you might need to change more
configuration settings. In particular, you should disable the DHCP
server function on the access point that functions as the repeater.
A750 Wireless Dual Band Gigabit Router JR6150
Advanced Settings
116