3.
In the Security Options section, select the WEP radio button.
4.
In the Authentication Type list, select one of the following types:
•
Automatic. If you enter a password in the Passphrase field and click the Generate
button, the four keys are automatically generated.
•
Shared Key. If you select this option, you must select one key and enter the value
manually.
5.
In the Encryption Strength list, select the encryption key size:
•
64-bit. Standard WEP encryption, using 40/64-bit encryption.
•
128-bit. Standard WEP encryption, using 104/128-bit encryption. This selection
provides higher encryption security.
6.
Depending on the authentication type, generate the key automatically or enter it manually:
•
If the authentication type is Automatic, do the following
a. In the Passphrase field, enter a password.
b. Click the Generate button.
For 64-bit WEP, four different WEP keys are generated. For 128-bit WEP, only
one WEP key is generated, and the four key fields are populated with the same
WEP key.
•
If the authentication type is Shared Key, do the following
a. Specify the active key by selecting the Key 1, Key 2, Key 3, or Key 4 radio
button.
b. Enter the value for the key manually:
-
For 64-bit WEP, enter 10 hexadecimal digits (any combination of 0–9, A–F).
The key values are not case-sensitive.
-
For 128-bit WEP, enter 26 hexadecimal digits (any combination of 0–9, A–F).
The key values are not case-sensitive.
7.
Click the Apply button.
A750 Wireless Dual Band Gigabit Router JR6150
genie BASIC Settings
31