Wpa/Wpa2 Enterprise - NETGEAR JR6150 User Manual

To change the WPA wireless security option and password:

1. Log in to the router.
For more information, see
2. Select BASIC > Wireless Settings.
3. In the Security Options section, select one of the WPA options with PSK.
4. In the associated Passphrase field, enter the password that you want to use.
The password is a text string from 8 to 63 ASCII characters or exactly 64 hexadecimal
digits. A hexadecimal digit is one of the following characters: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9,
A–F, or a–f.
Wireless clients must use the password to access the wireless network through the
router.
5. Click the Apply button.

WPA/WPA2 Enterprise

This security option is not for home use but is typically used in a business or enterprise.
WPA/WPA2 Enterprise does not use a password but supports 802.1x authentication, which
requires an internal or external RADIUS server. A Remote Authentication Dial In User
Service (RADIUS) server provides Authentication, Authorization, and Accounting (AAA)
management to grant (or deny) computers access to your wireless network.
WPA/WPA2 Enterprise can support WPA [TKIP] for WPA clients only, WPA2 [AES] for WPA2
clients only, and WPA [TKIP] + WPA2 [AES]. WPA [TKIP] + WPA2 [AES] is a combination of
TKIP and AES encryption for both WPA and WPA2 clients. WPA clients are supported at
speeds of up to 54 Mbps only. WPA2 clients are supported at speeds of up 300 Mbps.
WPA/WPA2 Enterprise supports five Extensible Authentication Protocol (EAP) authentication
methods: EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC,
and EAP-SIM.
To configure WPA/WPA2 Enterprise security:

1. Log in to the router.
For more information, see
A750 Wireless Dual Band Gigabit Router JR6150
Use NETGEAR genie after Installation
Use NETGEAR genie after Installation
genie BASIC Settings
29
on page 17.
on page 17.