Wireless Settings Panes - NETGEAR JR6150 User Manual

Choose any of the following actions:
a. To establish the PPTP connection manually, click the Connect button.
b. To terminate the PPTP connection manually, click the Disconnect button.
c. To close the Connection Status screen, click the Close Window button.

Wireless Settings Panes

To display the Wireless Settings panes:

1. Log in to the router.
For more information, see
2. Click the ADVANCED tab.
Information for the 2.4 GHz and 5 GHz WiFi bands displays separately.
The following information displays:
• Name (SSID). The wireless network name (SSID) that the router uses.
• Region. The geographic region where the router is used. It might be illegal to use the
wireless features of the router in some parts of the world.
• Channel. The operating channel of the wireless port. The default channel is Auto.
When Auto is selected, the router finds the best operating channel available.
• Mode. The wireless communication mode: Up to 54 Mbps, Up to 150 Mbps (the
default), or Up to 300 Mbps.
• Wireless AP. Indicates whether the radio of the router is enabled. If the radio is not
enabled, the Wireless LED on the front panel is off.
• Broadcast Name. Indicates whether the router is broadcasting its SSID.
A750 Wireless Dual Band Gigabit Router JR6150
Use NETGEAR genie after Installation
Administration
98
on page 17.
Scroll
down