Erase - NETGEAR JR6150 User Manual

Click the Browse button to find and select the .cfg file.
3.
4. Click the Restore button.
The file is uploaded to the router.
The router reboots.
WARNING:
Do not interrupt the reboot process.

Erase

You can use the Erase button to erase the configuration and restore the factory default
settings. You might want to erase the settings if you move the router to a different network.
You can also use the Restore Factory Settings button of the router to erase the configuration
and restore the factory settings. For more information, see
page 154.
To erase the configuration settings:

1. Log in to the router.
For more information, see
2. Select ADVANCED > Administration > Backup Settings.
3. Click the Erase button.
The factory default settings are restored. The password for the user name admin is
password and the LAN IP address is 192.168.1.1. DHCP is enabled.
A750 Wireless Dual Band Gigabit Router JR6150
Use NETGEAR genie after Installation
Administration
103
Factory Default Settings
on page 17.
on