To configure the router as a repeater:
1.
Log in to the router.
For more information, see
2.
Select ADVANCED > Advanced Setup > Wireless Repeating Function.
The wireless MAC address of the router displays onscreen. The 2.4 GHz and 5 GHz WiFi
bands are configured separately.
3.
Select the Enable Wireless Repeating Function check box.
4.
Select the Wireless Repeater radio button.
5.
Complete the Repeater IP Address field.
This IP address must be in the same subnet as the base station, but different from the
LAN IP address of the base station.
A750 Wireless Dual Band Gigabit Router JR6150
Use NETGEAR genie after Installation
Advanced Settings
117
on page 17.