Wep - NETGEAR JR6150 User Manual

2. Select BASIC > Wireless Settings.
3. In the Security Options section, select the WPA/WPA2 Enterprise radio button.
4. Select the WPA mode (WPA [TKIP], WPA2 [AES], or WPA [TKIP] + WPA2 [AES]).
5. Type the IP address of the RADIUS server.
The address can be on your LAN or it can be an external address.
6. Enter the port number for the RADIUS server in the range from 1 to 65535.
The default number is 1812.
7. Type the shared secret, which must be from 1 through 128 characters (the default value
is blank).
The shared secret is case-sensitive.
8. Click the Apply button.

WEP

Wired Equivalent Privacy (WEP) security is an authentication and data encryption mode that
is superseded by WPA-PSK and WPA2-PSK. WEP supports speeds of up to 54 Mbps and
does not function with WPS.
Note: The WEP option displays only if you select Up to 54 Mbps from the
Mode list.
To configure WEP security:

1. Log in to the router.
For more information, see
2. Select BASIC > Wireless Settings.
A750 Wireless Dual Band Gigabit Router JR6150
Use NETGEAR genie after Installation
genie BASIC Settings
30
on page 17.