Lexicon MX500 Owner's Manual page 40

Dual stereo/surround reverb firewire hardware plug-in
Table of Contents

Advertisement

MX500 System Menu
Input Source A
The MX500 has both analog and digital inputs that can be connected to.
Depending on which inputs you will be using, you need to select between
analog or digital sources. The MX500 offers three different input sources
to select from: Analog Mono L, Analog Stereo, and Digital. Input Source A
refers to whether you will be using analog A - Front (Stereo) inputs or digi-
tal input A. When only a single analog input is to be used, select Analog
Mono L and connect to the A - Front (Stereo) Left input only. All inputs
(analog and digital) can remain connected simultaneously in the event
you find yourself switching between using both. Use Knob A to select the
appropriate Input Source you will be using.
Input Source B
Input Source B is identical to Input Source A (explained above) except it
refers to analog and digital Input Pair B only. Use Knob B to select the
appropriate Input Source you will be using.
Clock Source
This option allows manual selection of either the internal or external clock
source for the MX500. When set to 44.1kHz, the MX500 utilizes an inter-
nal clock with a 44.1kHz sample rate. When set to 48kHz, the MX500 uti-
lizes an internal clock with a 48kHz sample rate. When set to Digital, the
unit utilizes the S/PDIF input clock source, even if an analog audio source
is used. The MX500 only accepts external digital clock information on the
Digital S/PDIF A input. Refer to The MX500 and S/PDIF I/O section on
page 12 for more information on using digital audio sources via S/PDIF.
Use Knob C to select the appropriate Clock Source you will be using.
Analog Output A
The MX500 analog outputs can be configured to run in stereo or in mono.
Each pair of outputs can be configured independently of the other. Analog
Out A refers to only A - Front (Stereo). When only a single output cable is
to be used, connect to the A - Front (Stereo) Left output only and set the
Output mode to Mono Left. Output Mode only affects the analog outputs.
Use Knob A to select between Mono Left and Stereo.
34

Advertisement

Table of Contents
loading

Table of Contents