Using The Mx500; Selecting And Loading Programs (Surround, Stereo Configurations); Selecting And Loading Programs (Dual Stereo Configuration); Storing/Copying Programs - Lexicon MX500 Owner's Manual

Using the MX500

usIng The mX500
SelectIng and loadIng ProgramS (Surround, Stereo
confIguratIonS)
1. Choose a program by rotating the Program/Load knob. The selected program
2. Press the Program/Load knob to load the program. If you would like the pro-
SelectIng and loadIng ProgramS (dual Stereo
confIguratIon)
When using the MX500's Dual Stereo Configuration, the Main Display shows two
program names simultaneously at the top level of operation. Next to one of the
program names will be a focus arrow. This arrow determines which program will be
changed when the Program/Load knob is rotated. To change which program the
focus arrow points to, rotate the Page/Select knob until one of the effects in the
Main Display is highlighted in the program you want to change.
(Example: If either Effect 1 or Effect 2 is highlighted, turning the Program/Load
knob will change the program shown in the top half of the Main Display (Program
A). If Effect 3 or Effect 4 is highlighted, turning the Program/Load knob will
change the program shown in the bottom half of the Main Display (Program B)).
1. Choose a program by rotating the Program/Load knob. The selected program
2. Press the Program/Load knob to load the program. If you would like the pro-

StorIng/coPyIng ProgramS

1. Press the Store button once and the program naming screen appears.
2. Turn Page/Select knob to move the edit cursor. Press the Page/Select knob
number flashes in the Program Display until loaded. The name of the pro-
gram also appears in the MX500's Main Display. The Factory or User LED
next to the Program Display lights to indicate whether a Factory or User pro-
gram is selected.
grams to be loaded automatically as they are selected with the Program/Load
knob, you can enable the Auto Load function in the MX500's System menu.
number will begin flashing in the Program Display until it is loaded. The
name of the program will also appear in the MX500's Main Display (Program
B). The Factory or User LED next to the Program Display will light to indi-
cate whether a Factory or User program is selected.
grams to be loaded automatically as they are selected with the Program/Load
knob, you can enable the Auto Load function in the MX500's System menu.
to clear the character. Turn Edit Knob A to change the character. Turn Edit
14