Quick Start; Standard Parallel Analog Connection; Powering The Unit - Lexicon MX500 Owner's Manual

Quick Start

QuICk sTarT
Ideally, you should read this entire manual before using the MX500. But, if you just
can't wait to get started, this section explains how to set up a simple parallel connec-
tion (using the MX500 with a mixer) and select a program.

Standard Parallel analog connectIon

1. Connect the mixer's Post Fader Aux Send outputs to the MX500's Left and Right
2. Connect the MX500 Left and Right (Front) outputs to a stereo Aux Return input

PoWerIng the unIt

1. Plug the included power cord into an A/C outlet.
2. Connect the power cord to the Power Jack connection on the MX500's back
MX500 MX500
Dual Stereo / Surround Reverb Dual Stereo / Surround Reverb
Firewire Hardware Plug-in Firewire Hardware Plug-in
(Front) inputs.
on the mixer (or a stereo line input, or two adjacent line inputs if you like).
Made in the USA
FUSE REPLACEMENT RATINGS
100V-120V 50/60Hz T 200mA L, 250V
220V-240V 50/60Hz T 160mA L, 250V
100V - 120V ~ 50/60Hz
18W
Aux
Return 1
panel and turn on the MX500's power.
Firewire
2
FRONT
THRU FIREWIRE A
A B
Aux Aux
Return 2 Send 1
REAR FRONT REAR
B A B
Aux
Send 2
Power
Store
System
Bypass