Specifying Scan Settings; [Background/Density]; [Resolution] - Konica Minolta bizhub C35 User Manual

Specifying scan settings

The [Background/Density], [Resolution] and [File Settings] parameters avail-
able from the [Settings] screen can be used to specify scan settings.

[Background/Density]

Specify the appropriate image quality settings for the document.
Item
[Background Removal]
[Density]
[Sharpness]

[Resolution]

Select the resolution at which the document is to be scanned.
Item
[150×150dpi]
[200×200dpi]
[300×300dpi]
[600×600dpi]
A finer scan has more information to be sent, therefore, the transmis-
sion time increases.
If [File Type] is set to [Compact PDF], [Resolution] can only be set to
[300×300dpi].
10-8
Description
Select the density of the background color at
which documents with a background color are to
be scanned. Nine density levels are available for
the background color.
Select the density at which the document is to
be scanned. Nine density levels are available.
Select the appropriate density setting according
to your document.
Select the strength of outlines, for example, on
characters and lines, for scanning the docu-
ment. To scan characters and lines with greater
sharpness, select a setting in the + direction.
Seven sharpness levels are available.
Description
Select this setting to scan the document at 150
× 150 dpi.
Select this setting to scan the document at 200
× 200 dpi.
Select this setting to scan the document at 300
× 300 dpi.
Select this setting to scan the document at 600
× 600 dpi.
Performing Scan to E-mail mode operations