Konica Minolta bizhub C35 User Manual page 49

1
Press the [Utility/Counter] key.
2
Press [Accessibility].
All factory default values are shown in bold.
Item
[Key Repeat /Interval]
[Time to Start]
[Key Interval]
[Sound Settings]
[Set all]
[Confirmation Sound]
[Input Confirmation
Sound]
[Invalid Input Sound] Settings
[Basic Sound]
3-4
Description
The length of time until the value begins to change
after a button is held down and the length of time for
the value to change can be specified.
Settings 0.1 to 3.0 seconds (Default:0.8)
Specify the length of time until a value begins to
change after a button is held down.
Settings 0.1 to 3.0 seconds (Default:0.3)
Specify the length of time for the value to change.
Settings can be specified for the various sounds pro-
duced with key operations.
Settings Enable: [Yes] / [No]
Volume: [Low] / [Middle] / [High]
To specify that sounds be produced, press [Enable],
and then press [Yes]. To adjust the volume, press
[Volume], and then press [Low], [Middle] or [High]. To
specify that sounds not be produced, press [Enable],
and then press [No].
Select if confirmation sounds are to be produced with
key operations.
Settings Enable : [Yes] / [No]
Volume : [Low] / [Middle] / [High]
Select whether sounds are produced when keys are
pressed to enter data.
Enable : [Yes] / [No]
Volume : [Low] / [Middle] / [High]
Select whether sounds are produced when keys are
pressed to enter invalid data.
Settings Enable : [Yes] / [No]
Volume : [Low] / [Middle] / [High]
Select whether sounds are produced when the
default setting is selected while scrolling through the
settings.
[Accessibility]