Selecting Driver Options/Defaults (For Windows); Windows Vista/Server 2008/Xp/Server 2003/2000 - Konica Minolta bizhub C35 User Manual

Selecting Driver Options/Defaults
(for Windows)
Before you start working with your printer, you are advised to verify/change
the default driver settings. Also, in case you have options installed, you
should "declare" the options in the driver.

Windows Vista/Server 2008/XP/Server 2003/2000

1
Choose the driver's properties as follows:
– (Windows Vista/Server 2008)
From the [Start] menu, click [Control Panel], then [Hardware and
Sound], and then click [Printers] to open the Printers directory.
Right-click the KONICA MINOLTA bizhub C35 PCL6, KONICA
MINOLTA bizhub C35 PS or KONICA MINOLTA bizhub C35 XPS
printer icon, and then click [Properties].
– (Windows XP/Server 2003)
From the [Start] menu, choose [Printers and Faxes] to display the
[Printers and Faxes] directory. Right-click the KONICA MINOLTA
bizhub C35 PCL6 or KONICA MINOLTA bizhub C35 PS printer icon
and choose [Properties].
– (Windows 2000)
From the [Start] menu, choose [Settings] and then [Printers] to display
the [Printers] directory. Right-click the KONICA MINOLTA bizhub C35
PCL6 or KONICA MINOLTA bizhub C35 PS printer icon and choose
[Properties].
2
If you have installed options, proceed with the next step. Otherwise, skip
to step 9.
3
Select the [Configure] tab.
4
Check that the installed options are correctly listed. If not, proceed with
the next step. Otherwise, continue with step 8.
5
Click the [Refresh] to automatically configure installed options.
5-2
The [Refresh] is available only if bi-directional communication is
available with the printer; otherwise it is grayed out.
If Windows Vista or Server 2008 is being used, [Refresh] can also
be clicked when the machine is connected via USB.

Selecting Driver Options/Defaults (for Windows)