Konica Minolta bizhub C35 User Manual page 326

Symptom
Printing from
a USB mem-
ory device is
not possible.
Printing
takes too
much time.
Blank pages
are printed.
Solving Other Problems
Cause
[Memory Direct Print]
is set to [Disable].
The file format (file
extension) is not one
that can be printed.
A public user is not
specified for user
authentication.
The machine is set to
a slow printing mode
(for example, thick
stock).
The machine is set to
power saving mode.
The job is very com-
plex.
A toner cartridge for a
different region or an
unapproved toner
cartridge is installed
([Incorrect toner car-
tridge]is displayed in
the message win-
dow).
If an error has been
detected during print-
ing job transmission
in the Copy mode, it
takes a while to pro-
cess the error and
resume the printing
operation.
One or more of the
toner cartridges are
defective or empty.
The wrong media is
being used.
Solution
Press the [Utility/Counter] key, and
then set [Admin Settings] - [Memory
Direct Print] to [Enable].
Only files with the format (extension)
for JPEG, TIFF, XPS or PDF can be
printed.
Press [USB/HDD], and then, with
[Memory Direct] - [File Type], select
the type of files to be displayed.
Contact the administrator of this unit.
It takes more time to print with special
media. When using regular paper,
make sure that the media type is set
properly in the driver.
It takes time for printing to start in
power saving mode.
Wait. No action needed.
Install a correct KONICA MINOLTA
toner cartridge approved for your spe-
cific machine.
Wait. No action needed.
Check the toner cartridges. The image
will not print correctly or not at all, if the
cartridges are empty.
Check that the media type.
13-27