Registering A Program Destination - Konica Minolta bizhub C35 User Manual

[Favorites]
[Index]
6
Press [OK].

Registering a program destination

The procedure for registering a program destination for scan transmissions is
described below.
Program destinations can be registered from the control panel of this
machine or from PageScope Web Connection. The following procedure
describes how to register from the control panel of this machine.
For details on registering from PageScope Web Connection, refer to
the [Reference Guide].
For details on specifying a program destination to send scan data,
refer to "Selecting a program destination" on page 10-31.
1
Press [Scan to E-mail] or [Scan to Folder] to display the initial Scan to
E-mail or Scan to Folder mode screen.
2
Specify settings for the various parameters available from the [Settings]
screen.
– For details on the parameters available from the Settings screen, refer
to "Performing Scan to E-mail mode operations" on page 10-3 and
"Performing Scan to Folder mode operations" on page 10-16.
3
In the control panel, press the [Mode Memory] key.
The list of program destinations appears.
4
Press [Register].
5
Specify settings for [Name] and [Dest.] for the program destination, and
then press [OK].
– Press
destination.
6
Press [OK].
Registering destinations
For frequently used destinations, set to [ON].
This displays the destination in the [Favorites]
list, allowing it to be found more easily.
Select the index characters that will be used to
search for the destination.
to display the address book screen. Select a registered
10-35