Using Call Forward; Selecting A Ring Tone - Nortel 1120E User Manual

1. During a call, press the system defined 3 Way Call key. The call is put on hold and a
dial tone sounds. On the display, an indicator flashes beside the line on which the
call is held.
2. Dial the number of the person you want to add to the call. At this time, you can talk
privately to the person you are adding, to announce the conference.
3. Press the 3 Way Call key again to merge the calls.
4. To end the conference press the 3 Way Call key.
Using the Mute Feature
Muting prevents the transmission of sounds through the microphone. Follow this
procedure to use the mute feature.
1. While on a call, press the mute key. A red light is turned on to indicate the mute
feature is enabled.
2. To turn off the feature, press the mute key again. The light is turned off, and the
feature is disabled.

Using Call Forward

Follow this procedure to forward calls to another IP Phone when you are away from your
desk.
1. To activate call forward without lifting the handset, press the key to which the
Forward feature is assigned.
2. Use the dial-pad to enter the extension to which you want to forward your incoming
calls.
3. Press the forward key again. An icon appears in the display, beside the forward key
label.
4. To turn off call forward, press the forward key. The feature is deactivated and the
icon disappears from the display.

Selecting a Ring Tone

Follow this procedure to select a ring tone. You can listen to a ring tone before you
select it, through the Play and Stop options.
1. From the main menu, select and open Audio. The Audio menu opens.
2. Scroll through the menu and select Play Ring Patterns. The list of ring tones opens.
3. To hear a ring tone before you select it, select a ring tone from the list and press
Play.
4. Press Stop to stop the ring tone from playing.
5. To select a ring tone, press Apply.
Nortel 1120e-1140e User Guide
Northwestern University Information Technology
Page 11
www.it.northwestern.edu
2/18/2008