Using The Handset Charger; Using The Handset Itself - Fortinet FON-860i User Manual

Using the handset charger

1. Press the Reset button on the back of the base. A five-minute
registration period starts, which allows handsets to register with
the base.
If you have multiple bases, only reset one base at a time, and wait
five minutes before resetting the next base.
2. If the handset is turned off, press the Red Phone key to turn it on.
3. Place the handset in the handset charger. The handset
automatically registers with the base, and the Configure SIP
Domain message appears on the display. This message indicates
that you must configure the FON-860i as an IP extension, as
described later. Once the handset is registered, the left
connection status indicator in the display will turn yellow. See
"Handset screen — idle mode" on page
4. Once the handset is registered, you can place additional
handsets in the handset charger for registration. If the five-minute
registration period has expired, but the handsets aren't all
registered, press the Reset button on the back of the base to
start a new registration period.

Using the handset itself

1. Press the Reset button on the back of the base. A five-minute
registration period starts.
2. In Idle mode, press the OK key on the handset to access the
Main menu.
3. Choose Settings, and then press the OK key.
Fortinet Technologies Inc.
Reset button
enables handset registration
Page 12
6.
FON-860i Telephone User Guide