Key operation in Search mode
Special keys
Turn the SELECT-VOLUME-SCROLL knob to change the direction of
the search.
While monitoring a channel, turn the SELECT-VOLUME-SCROLL knob
to resume searching.
In Custom Search mode, FUNCTION + turn the SELECT-VOLUME
SCROLL knob to select a custom search range. The scanner starts at the
custom search range you select here.
FUNCTION+ tap MENU to go to the Search for... menu.
During a Quick Search, FUNCTION+ tap MENU to go to the Srch/CloCall
Opt menu.
Keypad controls
Key Name
(2nd
operation)
Action On
Tap
FUNCTION
+ Tap
FUNCTION
+ Press & hold
Key Name
nd
(2
operation)
Action on:
Tap
FUNCTION
+ Tap
HOLD (Close
Call)
Enter Hold
mode.
Toggle Close
Start the search range assigned to this Search Key.
Call modes.
Enter Close
Call Only
mode.
Scan (Search)
Switch to Scan
mode.
Resume
searching.
UBCD396XT
2 (Search 2)
1 (Search 1)
Disable the custom search range assigned to this
key. Tap again to enable.
NA
4 (IF
exchange)
Disable the custom search range assigned to this
key. Tap again to enable.
When
monitoring a
frequency,
toggle the IF
for that
frequency.
131
3 (Search 3)
NA
6 (Display
5 (Volume
offset)
Switch the
NA
display mode.
NA
mode)