Edit Site; Options Available For All Sites; Edit Name; Set Quick Key - Uniden UBCD396XT Owner's Manual

35. Edit Site

When you create a new site, the scanner automatically assigns a default site name
using the following pattern
Site XXX-YYY TTT
where XXX is a 3-digit system index number, YYY is a sequential site number (1
through 256), and TTT is one of the following 3-letter type codes:
 EDC (any EDACS system)
 LTR (any LTR system)
 MOT (any Motorola system)
 P25 (a standard P25 system)
 1FQ (a single-frequency P25 system)

Options available for all sites:

You have the following options for sites:

Edit Name

Enter a name or edit the existing one. Names can be 16 characters long, and they
can contain upper and lower case letters, punctuation, and spaces. Turn the
SELECTVOLUME-SQUELCH knob on the handheld scanners or the SCROLL
/ FUNCTION knob on mobile scanners to choose the character you want, then
press 6 (right cursor) to move the cursor to the next character.

Set Quick Key

Assign this system or site to a Quick Key so you can easily enable or disable it
during scanning. Enter a number from 0 to 99; tap NO (the decimal point) if you
don't want to assign this system or site to a Quick Key. (For more information, see
Quick Keys.)

Set Startup Key

Assign this system or site to a Startup Key so you can lock or unlock it during
power up. Enter a number from 0 to 9; tap NO (the decimal point) if you don't
want to assign this system or site to a Startup Key. (For more information, see
Startup Keys.)
UBCD396XT
120