Set C-Ch Output; Set Gps Format; Set Pos Format; Set Time Format - Uniden UBCD396XT Owner's Manual

Set C-CH Output

Choose how you want the scanner to handle control channel data:
 Off : The scanner will not output the control channel data.
 On : The scanner will output the control channel data.
 Extend : The scanner will output the control channel data along with any
description.

Set GPS Format

Configure how the scanner displays position coordinates, time, and units during
GPS operation:

Set Pos Format

Select how the scanner displays longitude and latitude:
 DMS: DDD° MM' SS.ss : Display coordinates in degrees (DDD), minutes
(MM), and seconds (SS.ss).
 DEG: DDD.dddddd : Display coordinates as decimal degrees.

Set Time Format

Select 12H for 12-hour (am/pm) time format or 24H for 24-hour time format.

Set Time Zone

Set the number of hours your local time zone differs from universal time
(GMT/UTC). Select from -14 hours to +14 hours in half-hour (0.5 h) increments.

Set Unit

Select the unit used for distance: mile or kilometer (km).

Set Serial Port

Set the baud rate for the scanner's serial port. Choose from 4800, 9600, 19200,
38400,57600 , or 115200 bps; select Off to disable the serial port.
UBCD396XT
179