Set Cc Bands - Uniden UBCD396XT Owner's Manual

Decide whether the scanner triggers an alert tone and light when it detects a close
call hit. (Compare this to the system setting
tone and light when a Talk Group contains an emergency flag.) The available
options for Set Alert Tone
Set Alert Tone
Set Alert Light
Set CC Pause
Choose how long you want the scanner to pause on a close call hit before going
back to its previous operation; this setting only applies when the Set CC Override
feature is turned off. Choose a pause time of 3, 5, 10, 15, 30, 45, or 60 seconds. If
you want the scanner to wait for your input whenever it detects a close call hit,
select Infinite.

Set CC Bands

Choose whether you want the scanner to search for close call hits on the frequency
bands listed below. Select each band you want to search, then press YES to turn
that band On.
The scanner only searches for close call hits on bands that are turned on.
Band
VHF Low
1
VHF Low
2
Air Band
VHF
High 1
VHF
High 2
UHF
UBCD396XT
and Set Alert Light
Frequencies
25.0000–53.9900 MHz
54.0000–107.9000 MHz
108.0000–136.9875 MHz
137.0000–224.9000 MHz
225.0000–319.9750 MHz
320.0000–520.0000 MHz
147
Emergency Alert, which triggers a
are common to both types of alerts.