Conventional Systems; Programming A Conventional System; Create A System - Uniden UBCD396XT Owner's Manual

9. Conventional Systems

Please note that these pages are meant as general instructions.
Since a conventional system is really a collection of frequencies, the first thing you
need to know is the frequency for each channel you want to program.

Programming a Conventional System

To program a conventional system, you'll need to program the required elements in
the following order:

Create a system

1. Go to the Program System
2. The scanner will prompt you for the System Type. Select Conventional.
3. When the scanner prompts you confirm, tap YES.
4. The scanner creates the system with a default name. Select
want to change it.
5. If you need to change any of the system properties, you can do that now.
Unless a property is Required, you can operate the system without changing
the default settings.
System properties
All of these options can be found under your scanner's
necessary, the sub-menu and option name on each scanner are listed beside the
property.
Property
None
Name
Number tag
Quick key
Automatic Gain
Control (AGC)
Delay time
Hold time
UBCD396XT
menu and choose New System.
Option name
Required
Recommended
Edit Name
Set Number Tag
Set Quick Key
Optional
Set Audio AGC
Set Delay Time
Set Hold Time
Program System
19
Edit Name if you
menu. If