Locked Items; Key Operation In Scan Mode; Special Keys - Uniden UBCD396XT Owner's Manual

1. Scans or searches any unlocked systems programmed to system Quick Keys
(SQKs) in ascending order starting with the system or site assigned to SQK
#1.
 In the system, the scanner first checks any unlocked groups assigned
to group Quick Keys (GQKs)in ascending order starting with the
system or site assigned to SQK #1 (through GQK #0).
 The scanner then checks any remaining unlocked groups in that
system in the order in which you created them. If none of the groups
in the system have been assigned to GQKs, the scanner checks all
unlocked groups in the order in which you created them.
 The scanner does not check systems if the SQK is disabled off.
 The scanner does not check groups if the GQK is turned off.
2. Scans any remaining unlocked conventional systems (not assigned to an
SQK). (The scanner checks groups within each system as described in step
1.)
3. Checks all unlocked trunked systems (not assigned to an SQK). (The
scanner checks groups within each system as described in step 1.)
4. Searches through the designated general service frequencies (Public safety,
Air, etc.).
5. Searches through any unlocked frequencies saved in the Custom Search list.
6. Checks any frequencies saved in the Close Call Hits list.

Locked Items

The scanner does not check locked out items in either scanning or searching:
 A system or site is considered locked if
o its SQK is turned off
o its Set Lockout
 A group is considered locked if
o the system or site containing it is locked
o its GQK is turned off
o its Set Lockout
 A channel or frequency is considered locked if
o the group containing it is locked
o its Set Lockout

Key operation in Scan mode

Special keys

 Turn the SELECT-VOLUME-SCROLL knob to change the direction of
the scan.
UBCD396XT
field is set to Locked Out or Temporary L/O
field is set to Locked Out or Temporary L/O
field is set to Locked Out or Temporary L/O
127