Using Startup Keys - Uniden UBCD396XT Owner's Manual

2. Select Edit
the Startup Key to.
3. Select Search with
4. Enter the Startup Key you want to use for this search range.
To a custom search range :
1. Open the Search for...
2. Select Edit
the Startup Key to.
3. Select Search with
4. Enter the Startup Key you want to use for this custom search range.

Using Startup Keys

To activate a Startup Key:
1. Turn the scanner off.
2. Press & hold the number key that corresponds to the Startup Key while you
power the scanner on. (e.g. To activate Startup Key configuration # 2, press
& hold 2 on the number pad while turning the scanner on.)
3. Continue holding the number key until the scanner display shows the
number of the Startup Key configuration (In the example above, the display
shows Startup Config. Key No. 2 ).
For example, say you have 4 systems programmed according to the table below:
Assigned Startup
Key
3
None (.)
None (.)
9
Here is the result if you power on the scanner while you press and hold 3 :
Assigned Startup
Key
3
None (.)
Service, then select the service search range you want to assign
Scan, then select
menu.
Custom, then select the custom search range you want to assign
Scan, then select
Previous state
Locked
Unlocked
UBCD396XT
Set Startup
Set Startup
State
Locked
Unlocked
Locked
Unlocked
Resulting state
Unlocked
Unlocked (no change)
168
Key.
Key.