Assigning A Chnt - Uniden UBCD396XT Owner's Manual

3. Select Search with
4. Enter the number tag you want to use for this search range.
To a custom search range:
1. Open the Search for...
2. Select Edit
the number tag to.
3. Select Search with
4. Enter the number tag you want to use for this custom search range.

Assigning a CHNT

 You can assign CHNTs to channels even if the system does not have an
assigned SNT. However, without an SNT, you can only navigate to these
channels from within that system itself.
 CHNTs can be duplicated within their own system, but you will see a
warning when you create multiples.
 CHNTs can range from 0 to 999.
1. Open the Program System
2. Select the system containing the channel you want to assign the number tag
to.
3. Select Edit
4. Select Edit
tag to.
5. Select Set Number
6. Enter the number tag you want to use for this channel.
Scan, then select
menu.
Custom, then select the custom search range you want to assign
Scan, then select
menu.
Group, then select the channel group you want.
Channel, then select the channel you want to assign the number
Tag.
UBCD396XT
Set Number
Set Number
77
Tag.
Tag.