BC248clt.qxd
1/19/00
2 . Press L O C K O U T again to unlock the displayed
channel.
no longer appears in the display.
Restore All Locked Out Channel
To unlock all channels, you must be in the Manual Mode.
1 . Press M A N U A L .
2 . Press and hold L O C K O U T to unlock all
channels. The L / O indicator goes out on any
channel previously locked out.
DELAY
In the Scan Mode, the delay feature causes the scanner to remain on the frequency 2 seconds
after end of the transmission to wait for a possible reply. A Delay function can be set for each
programmed channel so that when searching stops on a channel there is a brief pause before
the scanning resumes. The delay can be set when your scanner stops on a channel while
scanning or when a channel is selected by Manual mode.
11:22 AM
Page 19
19