Priority - Radio Shack 200CH Owner's Manual

20-422.fm Page 20 Friday, January 7, 2000 12:54 PM
Note: If you turned the key tone off (see
"Turning the Key Tone On or Off" on
Page 21), the scanner does not beep
when you hold down
S/S-LOCKOUT
Removing Lockout from
Channels
Follow these steps to remove the lock-
out from a channel while scanning.
1. Press to stop scanning.
MANUAL
2. Use the number keys to enter the
channel number you want to delete
the lockout from.
3. Press .
MANUAL
4. Repeatedly press
L/O
disappears.
To remove the lockout from all channels
while scanning, use the number keys to
select the banks containing the skipped
channels, press
MANUAL
down until the scanner beeps
LOCKOUT
twice.
Note: If you turned off the key tone (see
"Turning the Key Tone On or Off" on
Page 21), the scanner does not beep
when you hold down
LOCKOUT

PRIORITY

The priority feature lets you scan
through programmed channels and still
not miss important or interesting calls on
specific channels. You can program one
stored channel in each bank as a priority
channel (up to 10 total). As the scanner
20
scans, it checks the priority channels in
each selected bank for activity every 2
seconds.
.
Notes:
The scanner automatically designates
the first channel in each bank as that
bank's priority channel. Follow these
until
LOCKOUT
steps to program a different channel as
the priority channel.
1. Press
2. Use the number keys to enter the
, then hold
3. Repeat Steps 1 and 2 for each
.
To review the priority channel numbers
for all banks, press
peatedly press
To turn on priority, press
ing scanning or when
PRI
the priority channel in each selected
bank every 2 seconds. It stays on the
channel if there is activity, and
pears.
• You can skip priority channels. If you
skip all priority channels, the scan-
ner displays P CH LOC OUt
you turn on the priority feature. See
"Skipping Frequencies/Channels"
on Page 19.
• The priority feature must be turned
off to listen to monitor memories.
.
PROGRAM
channel number you want to pro-
gram as the priority channel, then
press . P
PRIORITY
right of the channel number.
channel you want to program as a
priority channel.
PROGRAM
PRIORITY
appears, and the scanner checks
when
appears to the
then re-
.
dur-
PRIORITY
MAN
appears.
P ap-