Scanning By Car Number; Special Features; Using Priority - Radio Shack PRO-99 Owner's Manual

three digits, enter the number only. One of the car number's frequencies appears.
3. Repeatedly press ^ or v to view each of the car numbers you entered. As you press ^ or v, you see all
associated frequencies and 0.00000.
DELETING A FREQUENCY FROM A CAR NUMBER
1. Recall a car number using Easy Car# PGM menu.
2. Repeatedly press ^ or v until the frequency you want to delete appears.
3. Press FUNC to back to previous menu.
4. Press 2 to select Normal Ch PGM. Then press ENT.
5. Press 3 to select Program Car#.
6. Press and hold ./CLEAR for about 2 seconds. The car number clears on the display.
7. Press ENT.

SCANNING BY CAR NUMBER

Once you store car numbers into channels, you can set the scanner so it displays the car numbers you
assigned to the channels as it scans them.
To scan by car number, press FUNC then press SCAN/CAR/CH. It is switches between Car number and
bank/channel number. Scanner's display (top line) changes car number and bank/channel number, too. The
scanner displays Car#, then press SCAN. As the scanner scans channels, the car numbers you stored
appear in channel order, from the lowest to the highest channel.
Notes:
. If no car number is assigned to a channel, No Car# in the active banks. appears.
. If SQUELCH is adjusted so you always hear a hissing sound, the scanner does not scan properly.
When you finish scanning by car number, press FUNC then press SCAN/CAR/CH.

SPECIAL FEATURES

USING PRIORITY