Radio Shack 200CH Owner's Manual page 13

200ch vhf/air/uhf home scanner with scanner control protocol and wx alert
Hide thumbs Also See for 200CH:
Table of Contents

Advertisement

20-422.fm Page 13 Friday, January 7, 2000 12:54 PM
This table shows the frequency band ranges displayed by the scanner and the typical
usage, frequency coverage, and step for each.
Displayed
Frequency
Band Range
10-Meter Amateur Radio, VHF
29-54
Lo, 6-Meter Amateur Radio
Aircraft
108-137
Government
137-144
2-Meter Amateur Radio
144-148
VHF Hi
148-174
Government, 70-Centimeter
406-450
Amateur Radio
UHF Lo
450-470
UHF "T" Band
470-512
Notes:
• Your scanner searches at the preset frequency step rate (5 or 12.5 kHz) for each
band. You cannot change the frequency step rate.
• The scanner displays the nearest 1 kHz step. For example, if you tune to
406.1125, the scanner displays 406.112.
• While searching through a band, you might hear a frequency you want to store.
You can store any frequency into a monitor memory.
• You cannot change or delete any of the frequencies in the frequency bands.
Typical Usage
Frequency Coverage
(MHz)
29.000 to 54.000
108.000 to 136.975
137.000 to 144.000
144.000 to 148.000
148.000 to 174.000
406.000 to 450.000
450.000 to 470.000
470.000 to 512.000
Step
(kHz)
5.0
12.5
5.0
5.0
5.0
12.5
12.5
12.5
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

20-422

Table of Contents