If You Want To Stop Cutting Before It's Finished - Roland Stika SX-15 User Manual

4 Press the [STANDBY] key to switch off the power.
Make sure the [STANDBY] LED is not lit up.
5 Rotate the material feed knob and remove the sheet.

If You Want to Stop Cutting Before It's Finished...

Press the [STANDBY] key to switch off the power.
1
Click [Start]. Click [Settings], then click [Printers].
2
3 For the SX-15, double-click the [Roland SX-15] icon. For
the SX-12, double-click the [Roland SX-12] icon.For the
SX-8, double-click the [Roland SX-8] icon.
At the [Printers] menu, click [Purge Print Ducuments] or
4
[Cancel].
(If you're using Windows 2000, click [Cancel All
Documents].)
Make sure the displayed data for the file being printed
disappears.
Part 2 Performing Cutting
2-13