System Board - HP ZBook 17 Service Manual

4. Remove the power connector cable from the base enclosure (6).
Reverse this procedure to install the power connector cable.

System board

NOTE: All system board spare part kits include replacement thermal material.
NOTE:
Models that support quad-core processors have four memory slots. Models that support dual-
core processors have two memory slots.
Description
System board for use in non-Windows 8 models
System board for use in models with Windows 8 Standard
System board for use in models with Windows 8 Professional
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
106 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 46).
Spare part number
735592-001
735592-501
735592-601