HP ZBook 17 Service Manual page 120

2. Remove the Torx T8M2.5x4.0 screw that secures the bracket over the RJ-45 connector (2), and
then lift the bracket off the connector (3).
The RJ-45 connector bracket is available in the Bracket Kit using spare part number 737734-001.
The right rear plastic cover is available in the Plastics Kit using spare part number 733637-001.
3. Disconnect the power connector cable (1) and the speaker cable (2) from the system board.
4. Remove the six Torx T8M2.5x4.0 screws (marked with a triangle icon) (3) that secure the system
board to the base enclosure .
108 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts