HP ZBook 17 Service Manual page 78

Description
8192 MB memory module (PC3L-12800, 1600 MHz, DDR3)
4096 MB memory module (PC3L-12800, 1600 MHz, DDR3)
Before removing a primary memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the service door (see
6. Remove the optical drive (see
bay hard drive on page
7. Remove the keyboard (see
Remove the primary memory module:
1. Spread the retaining tabs (1) on each side of the primary memory module slot to release the
primary memory module. (The edge of the module opposite the slot rises away from the computer.)
2. Remove the primary memory module (2) by pulling the module away from the slot at an angle.
NOTE:
primary memory module slots.
Reverse this procedure to install a primary memory module.
66 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
Battery on page
Service door on page
Optical drive on page
59).
Keyboard on page
Memory modules are designed with a notch to prevent incorrect installation into the
46).
48)
57) or upgrade bay hard drive (see
63).
Spare part number
693374-001
691740-001
Upgrade