Table of Contents
Advertisement
b.
Remove the cable (2).
18.
If you need to remove the antenna cables from the display enclosure:
a.
Lift the antennas from the routing paths on the display enclosure (1).
b.
Remove the WLAN antennas (2) and WWAN antennas from the enclosure (3).
Antenna cables are available in the Raw Panel Support Kit, spare part number 735590-001.
The display enclosure is available using spare part number 740477-001.
Reverse this procedure to install the display assembly.
90
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
- Quick Links:
- Hard Drives, Primary and Secondary
- Keyboard
Hide quick links:
Advertisement
Table of Contents
