Display panel
Description
Raw display panel, 43.9 cm (17.3 in), HD+, anti-glare, LED, WVA
Raw display panel, 43.9 cm (17.3 in), FHD, anti-glare, LED, WVA
Before removing the display panel, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the display bezel (see
Remove the display panel:
1.
Remove the six Torx T8M2.5×7.0 screws (1) that secure the panel to the enclosure.
NOTE:
enclosure.
2.
Separate the top of the display panel from the top of the enclosure (2).
70
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page
Display bezel on page
If tape secures the panel to the enclosure, lift the tape to disengage the panel from the
46).
67).
Spare part number
735366-001
735367-001