Password Setting - Abit BE6 User Manual

3-36

3-9. Password Setting

This option allows you to set a password required to start the system (System) or to access to
the BIOS (Setup).
After you have set a password through the PASSWORD SETTING option, you can enter the
Security Option in the "BIOS Features Setup Menu" to select the security level in order to
prevent any unauthorized access.
Password setting procedure:
When you choose the Password setting option, the following message is displayed:
Type your password. When complete, press <Enter>. The following message is displayed:
Type your password again. When complete, press <Enter>. The password setting is
completed.
Password clearing procedure:
When you select the Password setting option, the following message is displayed:
Press <Enter>, the message "Password Disable" is displayed. Press a key. The password
clearing procedure is completed.
Do not forget your password. If you forget it, you will have to open the computer case,
clear the contents of the CMOS, and boot the system up again. By doing this, you must
reset all your parameters.
BE6
"Enter Password:"
"Confirm Password:"
"Enter Password:"
Notice
Chapter3